Tubular LC Lowpass
Custom Built LC Filters - .5 MHz to 1000 MHz

tlpPrinter

  • Reduced Size over Conventional Tubular Filters 

  • Low Insertion Loss - 0.2 dB per Section

  • 0.5 dB Maximum Ripple

  • BNC Connectors Standard, SMA Connectors Available

  • Order Any Cut-off Frequency from 0.5 MHz to 1000 MHz

  • Passive LC Filter Design

  • Good Temperature Stability: -55  to +85 C

  • 50 Ohms (75 and 100 Ohm Impedance available to 50 MHz)

  • 1 Watt Power Handling Capacity

Tubular L-C Lowpass Filters - Series TLP
Ordering Procedure - Examples

Filter Type (TLP)

Cut-Off Frequency

Number of Sections 
(See Graph)

Impedance (Ohms) B
(for BNC Connectors)
S
(for SMA Connectors)
Examples below
TLP500P2050B 500P = 500 MHz 2 050 = 50 Ohms B
TLP50P03075B 50P0 = 50.0 MHz 3 075 = 75 Ohms B
TLP5P554100S 5P55 = 5.55 MHz 4 100 = 100 Ohms S
Cut-off Frequency can be any 4 characters from .5MHz (00P5) to 1000 MHz (1000)
"P" represents the decimal point and, if used, is valid only in the 2, 3, and 4th position

Examples: 5P55 = 5.55 MHz,  58P7 = 58.7 MHz,  500P = 500MHz,  1000 = 1000 MHz

Mechanical Specifications in .pdf format (when online) (click here)

Performance Graph & Dimensions below
 

 

 

 

 

 

 

 

Tubular L-C Lowpass Filter Series TLP Performance Graph & Dimensions below


Number of Sections
(See Graph)
20 dB 40dB Size
2 1.60 2.30 TA
3 1.25 1.60 TA
4 1.15 1.40 TB
5 1.14 1.30 TB
6 1.10 1.20 TC

Series TLP Dimensions
 

B = .45 for BNC
B = .35 for SMA
D = .50

All filters are supplied in .500 diameter sealed metal tubes with BNC connectors or SMA connectors

(L) Size (Inches)

TA 2.00
TB 2.50
TC 3.00
Allen Avionics, Inc.
255 East Second Street, Mineola, NY  11501
Phone: (516) 248-8080 Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com

We are pleased to accept