Narrow Band Linear Phase Bandpass - 1 KHz to 80 MHz
nblpbpPrinter

The Allen Avionics filters tabulated on this page are the result of state of the art computer aided network synthesis and offer the best compromise in fast roll off, delay linearity, size and cost.

  • Type: Synthesized type offering excellence in fast cut-off and low delay variation characteristics.

  • Frequency Range: 1 KHz to 80 MHz

  • Impedance Range: 50 Ohms to 10 KOhms

  • Q Range: 2 to 50

  • 3 dB Bandwidth: .02 to .5 x Center Frequency (Fo)

  • Construction: Sealed in metal cans

  • Maximum Ripple: .5 dB

Order any Center Frequency from 1 KHz to 80 MHz. Interpolation between tabulated Center Frequencies and Bandwidth is allowable.

 

Size (Inches)

For optimum performance all units are supplied in metal cans with BNC connectors. SMA connectors, printed circuit mounting and end terminals are available on request.

Metal Cans

L

W

H

M -  3.00 x 1.625 x 1.125
M1 - 3.00 x 2.000 x 1.250
N -  4.00 x 1.500 x 1.250
N1 - 4.00 x 2.000 x 1.250
O 5.00 x 1.500 x 1.250
O1 5.00 x 2.000 x 1.250
P 6.00 x 1.500 x 1.250
P1 6.00 x 2.000 x 1.250

 Fo = (F1 + F2)  =  (F3 + F4)  = (F5 + F6)
Approximate Passband Delay (sec.) = Delay (D) / 2 x
π x FC (Hz)
Tabulated delay distortion (%) is defined as the maximum delay difference (%) between any two points within the 3dB passband.

 

Narrow Band Linear Phase Bandpass Filters - Series NBLPBP
Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
1 KHz A 2-4 10 6 1K N
4-10 10 6 1K N1
10-15 10 6 1K 0
B 8-10 15 9 1K O1
10-12 10 6 500 P
C 8-12 15 9 500 P1
D 2-5 10 12 2K P1
5-10 10 12 2K-5K P1
5 KHz A 2-5 10 6 500-2.5K N
5-12 10 6 500-2K N1
B 8-10 15 9 500- 1K N1
10-15 10 6 500- 1K O
C 8-12 15 9 500- 1K O1
12-15 10 6 500 P
D 2-8 10 12 2K-5K P1
8-15 10 12 3K-6K P1
10KHz A 2-5 10 6 200-5K N
5-12 10 6 200-1. 5K N
12-25 10 6 200- 1K N1
B 8-10 15 9 200- 1K N1
10-20 10 6 500 O
C 8-10 15 9 200- 1K O1
10-20 10 6 500 01
D 2-5 10 12 1K-5K P
5-10 10 12 1K-10K P1
10-20 10 12 5K-10K P1
25KHz A 2-5 10 6 150-2.5K M
5-12 10 6 150-1. 5K M1
12-25 10 6 100-1K N
25-35 5 3 100-500 N
7-10 15 9 100-1K N1
B 10-25 10 6 100-1K N1
25-30 10 6 100-500 O
C 7-10 15 9 100-1K O1
10-25 10 6 100-500 O1
D 2-5 10 12 500- 1K P
5-12 10 12 1K-5K P1
12-25 10 12 5K P1

 

Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
50KHz A 2-5 10 6 100-2.5K M
5-12 10 6 100-1. 5K M1
12-25 10 6 100-1K N
25-50 5 3 100-500 N
B 7-10 15 9 100-1K N1
10-25 10 6 100-1K N1
25-35 10 6 100-500 O
C 7-10 15 9 100-1K O1
10-25 10 6 100-500 O1
D 2-5 10 12 500- 1K P
5-12 10 12 1K-5K P1
12-25 10 12 5K P1

100KHz

A 2-6 10 6 50-1 K M
6-15 10 6 50-500 M1
15-25 10 6 50-500 N
25-50 10 6 50 250 N1
B 7-10 15 9 50-500 N
10-25 10 6 50-200 N1
25-50 10 6 50-100 O1
C 7-10 15 9 50-200 N1
10-25 10 6 50-150 01
25-50 10 6 50-100 P1
D 2-5 10 12 250-750 N1
5-10 10 12 1K-5K P
10-20 10 12 1K-10K P1
20-30 10 12 1K-5K P1
250 KHz A 2-5 10 6 50-500 M
6-12 10 6 50-250 M1
12-25 10 6 50-200 N
25-50 10 6 50-125 N1
B 7-10 15 9 50-250 N
10-25 10 6 50-150 N1
25-50 10 6 50-75 01
C 7-10 15 9 50-150 N
10-25 10 6 50-100 N1
25-50 10 6 50-75 O1
D 2-5 10 12 100-500 N1
5-10 10 12 500-1000 N1
10-18 10 12 250-1000 O1
18-25 10 12 500 P1
25-30 10 12 500 P1

 

 

 

Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
500 KHz A 2-5 10 6 50-250 M
5-10 10 6 50-200 M1
10-20 10 6 50-150 N
20-50 10 6 50-100 N
B 7-10 15 9 50-100 N1
10-25 10 6 50-100 O
25-50 10 6 50 O1
C 7-10 15 9 50-100 N
10-25 10 6 50 N1
25-50 10 6 50 O1
D 2-5 10 12 100-500 O1
5-10 10 12 200-1000 P1
10-20 10 12 500-1000 P1
750 KHz A 2-5 10 6 50-150 M
5-10 10 6 50-150 M1
10-25 10 6 50-100 N
25-50 10 6 50 N1
B 7-10 15 9 50-100 N
10-25 10 6 50 N1
25-50 10 6 50 01
C 7-10 15 9 50-100 N
10-25 10 6 50 N1
25-50 10 6 50 O1
D 2-5 10 12 50-100 N1
5-10 10 12 100-1000 01
10-12 10 12 500 P1
1 MHz A 2-5 10 6 50-100 M
5-10 10 6 50-100 M1
10-25 10 6 50-75 N
25-40 10 6 50 N1
40-50 5 3 50 O
B 7-10 15 9 50 N
10-25 10 6 50 N1
25-50 10 6 50 O1
C 8-12 15 9 50 N1
12-25 10 6 50 01
25-50 10 6 50 P
D 2-5 10 12 50-100 N1
5-10 10 12 100-500 O1
10-15 10 12 500 P1

 

Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
2.5 MHz A 2-5 10 6 50-100 M
5-12 10 6 50-75 M1
12-25 10 6 50-75 N
25-40 10 6 50 N1
40-50 5 3 50 O
B 7-10 15 9 50 N
10-25 10 6 50 N1
25-50 10 6 50 O1
C 8-12 15 9 50 N1
12-25 10 6 50 01
25-50 10 6 50 P
D 2-5 10 12 50-100 01
5-10 10 12 500 P1
5MHz A 2-5 10 6 50-100 M
5-12 10 6 50-75 N
12-50 10 6 50-75 N1
25-50 10 6 50 0
40-50 5 3 50 O
B 6-10 15 9 50 O
10-25 10 6 50 O1
25-50 10 6 50 P
C 6-10 15 9 50 0
10-25 10 6 50 O1
25-50 10 6 50 P
7.5 MHz A 6-8 15 9 50 M
8-12 10 6 50 N
12-25 10 6 50 N1
25-40 10 6 50 O
40-50 5 3 50 01
B 6-10 15 9 50 N
10-25 10 6 50 0
25-50 10 6 50 P
C 6-10 15 9 50 O
10-25 10 6 50 01
25-50 10 6 50 P
10MHz A 6-12 10 6 50 M
12-25 10 6 50 N
25-40 10 6 50 O
40-50 5 3 50 P
B 6-10 15 9 50 N
10-25 10 6 50 O
25-50 10 6 50 P

 

 

Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
10MHz (cont'd.) C 6-10 15 9 50 N
10-25 10 6 50 O
25-50 10 6 50 P
15MHz A 6-12 10 6 50 M
12-25 10 6 50 N
25-40 10 6 50 O
40-50 5 3 50 P
B 6-10 15 9 50 N
10-25 10 6 50 0
25-50 10 6 50 P
C 6-10 15 9 50 N
10-25 10 6 50 O
25-50 10 6 50 P
20MHz A 6-12 10 6 50 M
12 25 10 6 50 N
25-40 10 6 50 O
40-50 5 3 50 P
B 8-10 15 9 50 N
10-25 10 6 50 O
25-50 10 6 50 P
C 8-12 15 9 50 N
12-25 10 6 50 O
25-50 10 6 50 P
25MHz A 6-10 15 9 50 M
10-25 10 6 50 N
25-45 10 6 50 0
45-50 10 6 50 P
B 8-12 15 9 50 N
12-25 10 6 50 O
25-50 10 6 50 P
C 10-12 15 9 50 N
12-25 10 6 50 0
25-50 10 6 50 P
30MHz A 8-12 15 9 50 N
12-25 10 6 50 O
25-40 10 6 50 P
B 8-12 15 9 50 O
12-20 10 6 50 P
12-35 10 6 50 P
C 10-12 15 9 50 0
12-25 10 6 50 P
Center Frequency (Fo) Shape Factor Q Range (Fo) /
3dB BW
Maximum Distortion Impedance Range (Ohms) Metal Can Size
Delay
(%)
Phase
 ( Degrees)
40MHz A 8-12 15 9 50 N
12-25 10 6 50 O
25-40 10 6 50 P
B 8-12 15 9 50 O
12-20 10 6 50 P
12-35 10 6 50 P
C 10-12 15 9 50 0
12-25 10 6 50 P
50MHz A 8-12 15 9 50 N
12-25 10 6 50 O
25-35 10 6 50 P
B 8-12 15 9 50 N
12-20 10 6 50 O
20-30 10 6 50 O
C 10-15 10 6 50 P
15-20 10 6 50 P
60MHz A 5-10 10 12 50 P1
8-12 15 9 50 N
12-25 10 6 50 O
25-35 10 6 50 P
B 8-12 15 9 50 N
12-20 10 6 50 O
20-30 10 6 50 O
C 10-15 10 6 50 P
15-20 10 6 50 P
70MHz A 8-12 15 9 50 N
12-20 10 6 50 O
20-30 10 6 50 P
B 8-10 15 9 50 0
10-20 10 6 50 O
20-25 10 6 50 P
10-15 10 6 50 P
C 15-18 10 6 50 P1
8O MHz A 8-12 15 9 50 N
12-20 10 6 50 O
20-30 10 6 50 P
B 8-10 15 9 50 O
10-20 10 6 50 P
20-25 10 6 50 P
C 10-15 10 6 50 P1

Allen Avionics, Inc.
255 East Second Street, Mineola, NY  11501
Phone: (516) 248-8080 Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com