mhprinter
  • Small light weight metal cans
  • Low Insertion Loss - 1 dB Maximum
  • 1 dB Maximum Ripple
  • SMA Connectors or PCB mounting Standard
  • TO-8 packaging available up to shape factor D
  • Order Any Cut-off Frequency from 5 MHz to 500 MHz
  • Passive LC Filter Design
  • Good Temperature Stability
  • 50 Ohms (75 and 100 Ohm Impedance available to 50 MHz)
  • 1 Watt Power Handling Capacity
Sub-Miniature L-C Highpass Filters - Series MH
Ordering Procedure - Examples

Filter Type (MH)

Cut-Off Frequency

Shape Factor

 S (for SMA Connectors) 
P (for Printed Circuit Connectors)
T (for TO-8 packaging)
Examples below
MH-500P-C-P 500P = 500 MHz B,C,D,E,F S,P,T
MH-58P7-F-S 58P7 = 58.7 MHz
MH-75P2-C-T 75P2 = 75.2 MHz
Cut-off Frequency can be any 4 characters from .5MHz (00P5) to 1000 MHz (1000)
"P" represents the decimal point and, if used, is valid only in the 2, 3, and 4th position

Examples: 5P55 = 5.55 MHz,  58P7 = 58.7 MHz,  500P = 500MHz,  1000 = 1000 MHz
Mechanical Specifications in pdf format (click here)
Shape Factor
(See Graph)		 20 dB 40dB Size
B .625 .435 SA
C .800 ..625 SA
D .870 .714 SB
E .877 .769 SB
F .909 .833 SC

 

Size (Inches)
  L x W x H D E

SA

   .80 x .50 x .50 .30 .60
SB 1.00 x .50 x .50 .30 .80
SC 1.25 x .50 x .50 .30 1.00

Allen Avionics, Inc.
255 East Second Street, Mineola, NY  11501
Phone: (516) 248-8080  Fax: (516) 747-6724
E-Mail: Info@AllenAvionics.com

We are pleased to accept

It's your choice